Lorch MIG Welding Machine

Good-bye, transition arc
Weld without spatter thanks to a stable and easy-to-control pulse arc.

Exceptionally versatile
The right short arc, pulsed arc or spray arc for any job.

Effortless handling
Intuitive set-up, easy operation and minimum rework distinguish the MicorMIG Pulse as a favourite among welders.

Pulse arc
Minimum rework. Easy to set up and robust, the pulse process integrated into the MicorMIG Pulse now lets you weld with next to no spatter especially in the transition arc. This cuts down the need for extensive rework and saves valuable time during a welding wire change. What is more, MicorMIG Pulse includes all of the well known functions packed into the MicorMIG series.

Enhanced performance thanks to MicorBoost
Our MicorBoost technology affords you even greater effectiveness at a higher degree of efficiency when completing MIG-MAG welding tasks. Moreover, fast-action control technology provides for a perfect droplet transition of the pulse arc.

Upgradability
It has never been easier to adjust a welding system to the constantly changing requirements in the welding industry and to add on welding processes, welding programs and features that will streamline your workflows.

Ready for Speed
Take your productivity to the next level by adding the optional Lorch Speed processes “SpeedUp” and “SpeedArc” to your MicorMIG Pulse.

The P series at a glance

• Infinitely variable MIG-MAG welding inverter
• Outstanding MIG-MAG weld characteristics for mixed gas and CO2
• Comes with SpeedArc as standard
• P synergic, optionally available with SpeedUp and SpeedRoot (available as an upgrade)
• With manual metal arc welding function (incl. gouging from the P4500 upwards)
• In robust, completely transportable industrial housing
• Available as compact system or with separate wire feeder case
• Double feeder variants with one or two separate wire feed cases possible
• Cases available in different versions as workshop, construction, dockyard or robot case
• "3 steps to weld" operating concept
• Available as gas-cooled or water-cooled
• Industrial 4-roll precision feeder
• Digital display of welding current and voltage
• 2 operating variants can be selected
  - P basic (wire and voltage regulation)
  - P synergic (completely synergic control and plain text display)
• Possibility for remote control torch with the Powermaster torch
• Can be optionally equipped for push-pull torch and intermediate drive (for up to 43 m welding range)
• Can be completely automated (LorchNet connection, robot interface or bus coupling)
• Manufactured and tested according to DIN EN 60974-1, with CE mark, S-symbol and IP 23

Spot Hi Tech Welding Machines are offered by us. These are developed using best available technologies and following industrial standards. Our instruments are extensively acclaimed for dimensional accuracy, sturdy construction and smooth performance. These are easy to use and are appreciated by clients not only for energy efficiency and low maintenance.

Features

• Performance range
• Wire-feed options
• Case options
• Operation options

Model Overview

The S series at a glance

• Infinitely variable welding inverter for MIG-MAG pulsed arc welding
• Expandable with all MIG-MAG Speed processes (SpeedPulse, SpeedArc, SpeedUp and SpeedRoot)
• With manual metal arc welding function (incl. gouging from the S5 upwards)
• In robust, completely transportable industrial housing
• Available as compact system or with separate wire feeder case
• Double feeder variants with one or two separate wire feeders
• Feeder available in different versions: as workshop, construction, dockyard or robot case
• "3 steps to weld" operating concept
• Available as gas-cooled or water-cooled
• Industrial 4-roll precision feeder
• Plain text display with language selection
• Digital display of welding current and voltage
• Tiptronic job memory for up to 100 welding tasks
• Possibility for remote control torch with the Powermaster torch
• Can be optionally equipped for push-pull torch and intermediate drive (for up to 43 m welding range)
• Manufactured and tested according to DIN EN 60974-1, with CE mark, S-symbol and IP 23S

The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.

The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds