- Home
- ยป
- Products We Offer
- »
- Inverter Welding Machine
Inverter Welding Machine
Micormig Micro MIG-300 Welding Machine
Product Brochure
Welding Current Range | 300A |
Model | MicroMIG-300 |
Brand | Lorch |
Phase | 3 Phase |
Working Voltage | AC 400V |
Welding Current at 100% Duty Cycle | 200A |
Weight | 58 Kg |
Dimension (L x B x H) | 880 x 400 x 755 mm |
Lorch s MicorMIG is set apart by the exceptional MIG-MAG welding characteristics it delivers regardless of whether the welder uses mixed gas or CO. Dynamic control.
Select the arc characteristic you prefer. Depending on the operating panel you have selected, you can opt for dynamic levels that range from soft to hard . Synergic pre-selection.
MicorMIG versions BasicPlus and greater offer a large numberof welding programs for various material, wire and gas combinations. Depending on the design of your machine, you can set the programs in the wire feed compartment of the case or in the wire feed compartment of the compact system. Upgradability.
Never before has it been easier to adjust a welding machine to the ever increasing challenges posed by today s welding tasks. It is now a breeze to upload welding processes, welding programs and functions to the MicorMIG that both boost performance and streamline the workflow. Enhanced performance thanks to MicorBoost.
Our MicorBoost technology affords you even greater effectiveness at a higher degree of efficiency when completing MIG-MAG welding tasks. Better still, you will also be able to draw on higher voltage reserves when you need to produce perfect electrode welding results even if using CEL and special electrodes.
MIG ARC 400 Inverter Welding Machine
Product Brochure
Model Name/Number | MAG/ARC-400 |
Phase | Three Phase |
Brand | Sai |
Voltage | 400V |
Efficiency (Percentage) | 60% |
Frequency (Hertz) | 50 |
Automation Grade | Automatic |
MAG ARC 250 Inverter Welding Machine
Product Brochure
Brand | Sai |
Model | MAG ARC 250 |
Welding Current Range | 250A |
Power Consumption | 0093 |
Phase | Single Phase |
Working Voltage | 26.5 |
Insulation | A |
Cooling | Fan Cool |
Compatible Rods | 8 mm |
Warranty | 1 Year |
Weight | 17.5 Kg |
Dimension (LxBxH) | 505 x 218 x 355 mm |
Overall Dimension | 371 x 155 x 295 mm |
Input power voltage | AC 220 V |
No load voltage | 56 V |
Output current range | 50 V |
Rated output voltage | 160 V |
Duty cycle | 60% |
Efficiency | 85% |
Power factor | 0.93 |
Protection class | IP21 |
Diameter of rod | 3.2 mm |
Rated Input power capacity | 5.3 kVA |
MAG ARC 200 Inverter Type Welding Machine
Product Brochure
Current (Ampere) | 200A |
Model Name/Number | MAG/ARC 200 |
Technology | Rectifier Based, Inverter Bases |
Phase | Single Phase |
Voltage | 230V |
Wire Feeding Speed | 10 m/min |
Automatic Grade | Automatic |
Brand | Sai |
MAG ARC 200 Inverter Type Welding Machine MIG/ MAG / MMA Welding products are designed in order to ensure easy assembling or fitting on drill machines. We do quality inspection of these MIG/ MAG / MMA Welding products before delivering at the client’s end.
ARC 300 Inverter Arc Welding Machine
Product Brochure
Brand | Sai |
Model Name/Number | ARC300 |
Automatic Grade | Automatic |
Output Current (Ampere) | 100A |
Overall Dimension | 371 x 155 x 295 mm |
No load voltage | 56 V |
Efficiency | 85% |
Power factor | 0.93 PF |
Rated Input power capacity | 5.3 kVA |
Rated output voltage | 160 V |
Input power voltage | AC 220 V |
Phase | Single Phase |
Features:
- Power Saving up to 30 – 70%
- Good ARC start and arc force
- Power Factor (PF) more than 0.9
- Suitable to weld all kind of Electrodes
- Light in weight & compact in size
- High Quality & Spatter less in welding
- Protection against low voltage, high voltage, single phase & surge voltage
ARC 250 Inverter Welding Machine
Product Brochure
Brand | Sai |
Model Name/Number | ARC 250 |
Phase | 2 Phase |
Overall Dimension | 545 x 218 x 355 mm |
Input power voltage | AC 440 V |
Efficiency | 60% |
Power factor | 85 |
Rated Input power capacity | 9.4 kVA |
Output current range | 62 A |
Rated output voltage | 250 V |
Features:
- Power Saving up to 30 – 70%
- Good ARC start and arc force
- Power Factor (PF) more than 0.9
- Suitable to weld all kind of Electrodes
- Light in weight & compact in size
- High Quality & Spatter less in welding
- Protection against low voltage, high voltage, single phase & the urge voltage
TIG 160S Inverter Welding Machine
Product Brochure
Brand | Sai |
Phase | Single Phase |
Input power voltage | AC 220 V |
Welding Thickness | 5 mm |
Efficiency | 85% |
Rated Input power capacity | 3.2 kVA |
No load voltage | 43 V |
Output current range | 160 A |
Duty cycle | 60% |
Rated output voltage | 16.4 V |
Weight | 80 Kg |
Power factor | 0.93 |
Overall Dimension | 371 x 155 x 295 mm |
Protection class | IP23 |
Diameter of rod | 3.2 mm |
Post Gas | 2.5 sec |
Sai MAG ARC-250 Welding Machine
Product Brochure
Welding Current Range | 250A |
Model | MAG/ARC-250 |
Brand | Sai |
Power Consumption | 8.3 kVA |
Phase | 3 Phase |
Working Voltage | AC 400V |
Power Factor | 0.93 |
Efficiency | 0.85 |
Protection Class | IP 21 |
Weight | 17.5 kg |
Dimension (L x B x H) | 505 x 218 x 355 mm |
Wire Feeding Speed | 13 m/min |
Duty Cycle | 60% |
We are the leading manufacturer and supplier of Sai MAG ARC-250 Welding Machine Supplies which are made from high quality of raw material. These MIG/ MAG / MMA Welding products are designed in order to ensure easy assembling or fitting on drill machines. We do quality inspection of these MIG/ MAG / MMA Welding products before delivering at the client’s end.
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.
The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds
Wire Feeding Speed:
- 2.5-13 m/min